Chafe-Pro®

Marine Hydraulic-Hose Covers

CHAFE-PRO® hydraulic-hose covers are designed to protect hydraulic hoses from destruction caused by long exposure to UV radiation, the elements, from cutting, and chafe abrasion.  CHAFE-PRO® is constructed of a layer of tough non-porous ballistic nylon that is used in our commercial-grade marine-chafing gear.  Our hydraulic-hose covers provide additional protection from leaks as they will act as a barrier against leak spray.  CHAFE-PRO® hose covers will minimize the potential of leaked high-pressure hydraulic fluids from coming in contact with heated surfaces or nearby personnel.

Our unique patented system permits the installation of our covers on hose lines without having to remove a hose from its system.  CHAFE-PRO® hydraulic-hose covers are attached to the hose with a "hook and loop" closure.  The ends of the cover are secured to the hose fittings with two nylon tie-wraps.  The inspection or servicing of a hose line is easy, as all that is required is to cut the nylon tie-wraps and undo the closure.

Both the installation and removal of a CHAFE-PRO® cover is easily accomplished by an individual within a matter of a few minutes.

    

 

CHAFE-PRO® hydraulic-hose cover models are sold by length in units of inches.

Model Number
(xx = desired length)

Outside Diameter of Hose in Inches

Unit Width in Inches* (nominal)

05-COV-xx

0.5 - 1.0

5

06-COV-xx

1.0 -1.25

6

08-COV-xx

1.25 - 2.0

8

09-COV-xx

2.0 - 2.5

9

11-COV-xx

2.5 - 3.0

11

13-COV-xx

3.0 - 3.5

13

15-COV-xx

3.5 - 4.0

15

* Includes approximately a two-inch overlap for the closure
All dimensions are nominal.  Remember to size the unit wide enough so that it covers the end fittings.
The standard color for the COV series is black.

 

For more information contact:

E-Mail: Fjordinc@aol.com                    Phone/Fax  336 567- 0336